Problems tied to this model year

2015 Chrysler 200

Compare official recall campaigns, grouped owner wording and source-backed problem files for this exact vehicle-year.

Problem files
5
Official recalls
Loading
Owner reports
Loading

Live federal records

NHTSA recalls and owner reports

These records load from the official federal services and are cached on this website for six hours.

Open full lookup

Loading the official records for this vehicle-year…

Source-backed problem files

Documented conditions for 2015

A matching phrase gets you to the record. Confirm the engine and build date there, then check any VIN rule before authorizing a repair.

Safety recallImmediate safety action

2015 Chrysler 200 · Electrical & electronic systems

Undersized door wiring may overheat and melt insulation

NHTSA campaign 14V480000 lists the 2015 Chrysler 200 for a condition in which undersized door wiring may overheat and melt insulation.

“2015 Chrysler 200 door wiring overheats”“Chrysler 200 melted door wire insulation”
Read file ↗
Safety recallPrompt inspection

2015 to 2017 Chrysler 200 · Electrical & software

Electrical or software fault may disable vehicle functions

These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging.

“dashboard lit up with warnings”“car electronics stopped working”
Read file ↗
Safety recallPrompt inspection

2015 Chrysler 200 · Transmission & drivetrain

Powertrain defect may allow a vehicle rollaway

The automatic transmission parking pawl may become contaminated or the park rod may become dislodged or broken.

“transmission slips”“car will not move”
Read file ↗
Safety recallPrompt inspection

2015 Chrysler 200 · Transmission & drivetrain

Powertrain defect may interrupt drive

The transmission sensor clusters may have insufficient crimps in the transmission wire harness, and as a result, the transmission may unexpectedly shift to neutral.

“transmission slips”“car will not move”
Read file ↗
Safety recallPrompt inspection

2015 Chrysler 200 · Steering & suspension

Suspension component may fail

Due to an insufficient weld, the rear shocks may detach from the vehicle at one end and possibly damage other chassis components, the tire or result in reduced braking.

“clunk from suspension”“car feels unstable”
Read file ↗

01 · Match

Choose the closest description

Compare when it happens, how the car feels and which warning lights appear.

02 · Verify

Check whether the record fits

Model year alone is not enough. The engine, build date or VIN may narrow it further.

03 · Act

Decide what happens next

Read the safety warning first. Then take the source and symptom notes into the diagnostic conversation.

Wrong year?

Choose another Chrysler 200 model year