Safety recallImmediate safety action

2021 Hyundai Palisade · Trailer wiring

Tow-hitch wiring harness short and fire risk

Moisture or debris in certain genuine Hyundai tow-hitch harness modules can cause a short and a fire while driving or parked.

Vehicles covered
2020 to 2022
Evidence level
Safety recall with final harness and fuse remedy
Information reviewed
August 2, 2026
Jurisdiction
United States

What the reviewed source says

Start with the documented condition, not a parts guess.

Hyundai recall 235 covers certain 2020 to 2022 Palisade vehicles that may have a genuine Hyundai accessory tow hitch and wiring harness. The module can short after moisture or debris contamination and create a fire risk even with the ignition off. The current repair adds a protective extension and lower-rated fuse after inspection; a failed harness is replaced.

Words owners may use

Does this match the moment?

“smoke near trailer hitch”“burning smell at back of Palisade”“tow wiring melted”“trailer fuse keeps blowing”“hitch connector gets hot”“Palisade park outside recall”

Symptoms in the pattern

  • Burning smell, smoke or heat near the rear tow-hitch wiring
  • Melted wiring or connector housing
  • Trailer-light or tow-harness electrical faults
  • The safety defect can cause a fire while the vehicle is parked with the ignition off

Vehicles and scope

  • Certain 2020 to 2022 Hyundai Palisade vehicles
  • Vehicles with a genuine Hyundai accessory tow hitch and wiring harness supplied as a port, dealer or over-the-counter accessory
  • Physical equipment and VIN status both need confirmation

Manufacturer position

What the official procedure directs

Hyundai tells dealers to inspect the genuine accessory harness and take the prescribed electrical measurement. The result determines whether to install the extension repair or replace the harness assembly.

Mileage context

Recall 22V-633 is based on tow-harness fitment and vehicle production records, not mileage.

Original evidence

Open the documents behind this page.

Repair paths and safe checks

Separate the diagnosis from the action.

Official repair pathHyundai dealer · Inspection and wiring repair

Complete Hyundai recall 235

Have Hyundai confirm the VIN and accessory-harness fitment. The dealer tests the harness, then installs the extension repair with its updated fuse. A failed harness assembly is replaced.

Boundary

The recall procedure uses current measurement and crimping steps that should not be copied as a home repair.

What owners reported

Did this repair fix the same symptom on your car?

Loading…

Loading owner reports…

Safe owner checkVisual check · 5 minutes

Identify the tow connector from outside

Without opening the module or touching wiring, note whether a tow connector and genuine Hyundai hitch are fitted and photograph them for the dealer. Check the VIN under recall 235.

Boundary

Do not handle wiring that is warm, melted or giving off an odor.

What owners reported

Did this repair fix the same symptom on your car?

Loading…

Loading owner reports…